How big is it

214, 240 or 270 mm wide, 104 mm tall The three hook board is close to the length of a 9 inch ruler, and about as tall as a bank card is long.

Home and gifts

Wall Key Holder

A fluted wall key holder with the family name and a date inlaid flush, three to five hooks, a closing gift realtors reorder.

$54

Ships free. $54 delivered, before tax.

Ships within 6 business days, then 2 to 5 days in transit

The Keyed Promise If we got it wrong, it arrived damaged, or a measured piece misses your numbers, we print it again free.

0 / 18
For example The Parkers. The board widens a little for a long name.
0 / 26
For example Est. 2026, a house number, or Welcome home, 14 Nov 2026 for a closing gift.
Finish

Colorway

More colorways 19

No. 01 Linen Warm minimal, quiet pairs

No. 02 Marquee Navy, charcoal and metal, the classic desk pairs

No. 03 Sorbet Spring and wedding color

No. 04 Vesper Deep wine, aubergine and forest

No. 06 Tidewater Coastal blues and patina

Matte pairs are included. Metallic or satin +$6, stone, wood or shimmer +$10, once per piece. See every colorway

Mix your own colors
Board color
Lettering color

Generated for you, printed for your order.Our software draws this piece around the words you type, and it is printed for this order only. It arrives with a card that records what it was made from: your words, its size and the date it was generated. A Morse piece's card prints the message and its code, letter by letter.

Made once, for you, so it cannot be returned. Defects and misses on our side are printed again. You have 12 hours to change it: email [email protected].

About this piece

A place by the door for every set of keys. The family name and a date are inlaid flush 1.2 mm in a second color on a smooth panel framed by fine reeding, and three, four or five hooks stand out from a plain rail along the bottom. A square keyway notch is cut into the top edge.

The hooks are printed on their side, so the layers run along the stem, and each one presses into its own keyway socket in the rail. Two hidden keyhole slots in the back take the screws and wall anchors that come in the box. Keyed in Morse spells the family name in the flutes as dots and dashes.

Who it is for

  • A housewarming, a first home or a wedding.
  • Realtors: a closing gift with the closing date on the second line, the same layout reordered for every house.
  • An entry, a mudroom or the door to the garage.

Specifications

MaterialPLA, matte, for indoors
Size214, 240 or 270 mm wide, 104 mm tall, 10 mm board
LetteringInlaid flush 1.2 mm in the second color
HooksPrinted on their side for strength, pressed into keyway sockets
MountingTwo hidden keyhole slots, screws and wall anchors included
SignatureSquare keyway notch in the top edge
Size214 x 34 x 104 mm as shown, varies with your choices
ShipsWithin 6 business days, Standard shipping (USPS Ground Advantage, 2 to 5 days after it ships)

In the box

  • One key holder with the hooks fitted, in the finish and colors you chose
  • Two screws and two wall anchors

Not included

  • Keys and key rings
  • Logos or artwork

Questions about the wall key holder

How much will the hooks hold?

They are made for keys, a lanyard or a dog lead. Coats and bags belong on the Named Wall Hooks, which are larger.

Can a realtor order these for every closing?

Yes. Write to [email protected] with the layout once, then send the family name and the closing date for each house.

What goes on the second line?

Up to 26 characters: Est. 2026, a house number, or Welcome home, 14 Nov 2026.

How big is it?

104 mm tall and 214, 240 or 270 mm wide for three, four or five hooks. The board is 10 mm thick and the hooks stand out 24 mm.