How big is it

each tile 66 x 108 mm, hook stands out 34 mm Each tile is about the size of a playing card held upright, a little wider.

Home and gifts

Named Wall Hooks

A set of three to five fluted wall hooks, one name or initial inlaid flush on each, for coats, bags and leads.

$64

Ships free. $64 delivered, before tax.

Ships within 6 business days, then 2 to 5 days in transit

The Keyed Promise If we got it wrong, it arrived damaged, or a measured piece misses your numbers, we print it again free.

Names, one per hook 5 hooks

Pasting fills the names below in order. Check each one; every hook prints exactly as typed.

  1. 0 / 7
    A name up to 7 letters or one initial. A blank hook prints plain fluted.
  2. 0 / 7
  3. 0 / 7
  4. 0 / 7
    Used for sets of four or five.
  5. 0 / 7
    Used for a set of five.

Colorway

More colorways 19

No. 01 Linen Warm minimal, quiet pairs

No. 02 Marquee Navy, charcoal and metal, the classic desk pairs

No. 03 Sorbet Spring and wedding color

No. 04 Vesper Deep wine, aubergine and forest

No. 06 Tidewater Coastal blues and patina

Matte pairs are included. Metallic or satin +$6, stone, wood or shimmer +$10, once for the whole set. See every colorway

Mix your own colors
Hook color
Name color

Generated for you, printed for your order.Our software draws this piece around the words you type, and it is printed for this order only. It arrives with a card that records what it was made from: your words, its size and the date it was generated.

Made once, for you, so it cannot be returned. Defects and misses on our side are printed again. You have 12 hours to change it: email [email protected].

About this piece

One hook for everyone, so the coats and the dog lead stop landing on the same peg. Each tall tile carries one name or an initial inlaid flush 1.2 mm in a second color on a smooth panel, fine reeding above and below, and a square keyway notch in the top edge.

The hooks are printed on their side, so the layers run along the stem, and each presses into a socket near the bottom of its tile. Two hidden keyhole slots per tile, one above the other, take the screws and wall anchors that come in the box. A blank name prints a plain fluted tile.

Where it goes

  • An entry or a mudroom, one hook per person.
  • The dog's lead and harness, with the dog's name.
  • A bathroom for towels, or a bedroom door for robes.

Specifications

MaterialPLA, matte, for indoors
SizeEach tile 66 x 108 mm, 10 mm thick; the hook stands out 34 mm
NamesOne per hook, up to 7 letters, inlaid flush 1.2 mm in the second color
HooksPrinted on their side for strength, pressed into keyway sockets
MountingTwo hidden keyhole slots per hook, screws and wall anchors included
SignatureSquare keyway notch in the top edge of every tile
Size66 x 44 x 108 mm as shown, varies with your choices
ShipsWithin 6 business days, Standard shipping (USPS Ground Advantage, 2 to 5 days after it ships)

In the box

  • Three, four or five hook tiles with the names you chose, hooks fitted
  • Two screws and two wall anchors per tile

Not included

  • Logos or artwork

Questions about the named wall hooks

How much will a hook hold?

A coat, a bag or a lead. Fix them into a stud or with the anchors provided, and do not put your own weight on them.

How long can a name be?

Up to 7 letters, or one or two initials set large.

How far apart do I hang them?

Each tile is 66 mm wide. About 20 mm between tiles reads as a set.