How big is it
500 or 560 mm wide, 210 mm deep, 90 mm tall The 500 mm riser is about as wide as a typical keyboard and raises the screen about the height of a coffee mug.
Monitor Riser
A fluted two piece monitor riser with your name inlaid in the deck, a phone slot and a cable notch.
About this piece
A riser that lifts a monitor 90 mm to a better height and looks like it belongs on the desk. The front is cut with bold vertical flutes, your name is inlaid flush in a second color in the deck in front of the monitor, and the two halves meet at a square keyway notch, the Keyedworks mark, right at the seam.
It prints as two halves so each fits the printer, and they join with three square pegs in the accent color: push the pegs into one half, press the other on, done. The left half has a slot that holds a phone upright, and each half has a notch in the back for cables. A keyboard tucks underneath when you are done for the day.
This is a long print, so we make two a week and it ships in about two weeks.
Who it is for
- A home office desk where the monitor sits too low.
- A new job, a promotion or a first apartment desk setup.
- 500 mm for a 24 inch monitor, 560 mm for a 27 inch.
Specifications
| Material | PLA, matte |
|---|---|
| Size | 500 or 560 mm wide, 210 mm deep, 90 mm tall |
| Build | Two halves joined by three 6 mm square keyed pegs in the accent color |
| Deck | 8 mm thick, for one monitor and its stand (not a step, a seat or a shelf for a printer) |
| Name | Inlaid flush 1.2 mm in the deck |
| Extras | Phone slot on the left, a cable notch in the back of each half |
| Size | 500 x 210 x 90 mm as shown, varies with your choices |
| Ships | Within 10 business days, Standard shipping (USPS Ground Advantage, 2 to 5 days after it ships) |
In the box
- Two riser halves in your colors, with your name in the deck
- Three keyed pegs in the accent color
Not included
- The monitor, phone or cables
- Logos or artwork
Questions about the monitor riser
What can it hold?
It is made for one monitor and its stand. It is not a step, a seat or a shelf for a printer.
Does it come in one piece?
No. It ships as two halves and three pegs because a riser this wide is larger than the printer. The pegs are snug, so the two halves sit as one, and they come apart again for a move.
Will my monitor stand fit?
The deck is 210 mm deep. Most 24 and 27 inch monitor feet are 180 to 230 mm deep; measure yours, and if it is deeper write to us before you order.
Can I skip the name?
Yes, leave the name blank and the deck stays plain.
Why does it take two weeks?
Each half is a long print, and we only run two risers a week so the rest of the shop keeps its ship dates.
